| Parameter | Description |
|---|---|
| acres | Display properties with >= acreage. |
| areas | areas= defines the currently selected areas. When set, the page will initially draw with: listings that will match these areas. search panel (if present) that will display these areas as the dropdown title Of course, after this page is initially displayed, a visitor can change selections on the search panel, and the listings will update in … Read more |
| bayfront | Display only properties that are bayfront * Some MLS’s do not share this data. |
| building | Display listings found in a specific building. This search is a partial match search, so if you use building=”huntington”, all listings for both ‘huntington north’ and ‘huntington south’ buildings will be included. NOTE: Not all MLS’s share building information. |
| canalfront | Display only properties that are canalfront * Some MLS’s do not share this data. |
| cities | cities= defines the currently selected cities / towns. When set, the page will initially draw with: listings that will match these cities or towns. search panel (if present) that will display these cities as the dropdown title Of course, after this page is initially displayed, a visitor can change selections on the search panel, and the … Read more |
| community_55_plus | Display listings within 55+ adult communities. If the MLS supports this, a 55+ Community checkbox is also available in the “More” search panel dropdown: |
| community_equestrian | Display horse listings. *This data may not be available in your MLS. |
| community_gated | Display listings within gates communities. If the MLS supports this, a “Gated” checkbox will be available in the “More” search panel dropdown. |
| condo_assoc | Display listings found in a specific condominium association. This search is a partial match search, so if you use condo_assoc=”kensington”, all listings for both ‘kensington manor’ and ‘kensington heights’ will be included. NOTE: Not all MLS’s share condo association information. |
| date_added | date_added=”1week” The “1week” can be any combination of <number> + <day / week / month>. For instance: date_added=”37days” date_added=”2months” date_added=”9months” |
| foreclosed | Display only foreclosed/bankowned properties. |
| golf | Display only properties that abut or are nearby golf facilities * Some MLS’s do not share this data. |
| group | Most pages will just have one Rover IDX shortcode – rover_idx_full_page or rover_idx_results, for instance. But in the unusual situation where you have multiple Rover IDX shortcodes, and you want to make sure that one search panel drives a specific results area on that page. For instance, these shortcodes will draw a search panel, and … Read more |
| gulffront | Display only properties that are gulffront * Some MLS’s do not share this data. |
| harborfront | Display only properties that are harborfront * Some MLS’s do not share this data. |
| lakefront | Display only properties that are lakefront * Some MLS’s do not share this data. |
| listing_agent_mlsid | Display listings for specific agent(s). You can specify one agent mlsid, or a comma separated list of agent mlsids. You can look on the Rover IDX >> General >> Office and Agents tab to find individual agent mlsid’s. You can specify * for the agent mlsid, and Rover will automatically use all active agent mlsids for the website. |
| listing_date | Display new listings. The value specified can be a relative date or a specific date: Relative dates could be: – listing_date=”3days” – listing_date=”1week” – listing_date=”1month” Specific dates could be (always YYYY-MM-DD): – listing_date=”2017-04-02″ |
| listing_modified | Display updated listings. The value specified can be a relative date or a specific date: Relative dates could be: – listing_modified=”3days” – listing_modified=”1week” – listing_modified=”1month” Specific dates could be (always YYYY-MM-DD): – listing_modified=”2017-04-02″ |
| listing_office_mlsid | Display listings for specific office(s). You can specify one office mlsid, or a comma separated list of office mlsids. You can look on the Rover IDX >> General >> Office and Agents tab to find individual office mlsid’s. You can specify * for the office mlsid, and Rover will automatically use all active office mlsids for the website. |
| listings_per_page | Number of properties per page. You can tell Rover to how many listings to display on a page by setting that preference globally in Rover IDX >> Styling >> Listing Layout. If you want to override that global setting for a specific page, just add listings_per_row=”2″ to your shortcode. The default is 24. * … Read more |
| listings_per_page_mobile | Number of properties per page when displayed on any mobile device. You can tell Rover to how many listings to display on a page by setting that preference globally in Rover IDX >> Styling >> Listing Layout. If you want to override that global setting for a specific page, just add listings_per_row=”2″ to your shortcode. … Read more |
| map_center | By default, Rover automatically zooms and pans the map to display all the property markers. You can configure the map layout to center on a specific point (lat,lng) and also a specific zoom. |
| map_scroll_wheel | Enable scrollwheel zooming on the map. The scrollwheel is disabled by default. |
| map_type | Define the map style. Choices are satellite, hybrid, terrain, and roadmap. Default is roadmap. |
| map_zoom | By default, Rover automatically zooms and pans the map to display all the property markers. You can configure the map layout to center on a specific point (lat,lng) and also a specific zoom. Zoom help – valid zoom values are 0 – 19 0 lowest zoom (whole world) 19 highest zoom (individual buildings, if available) |
| marshfront | Display only properties that are marshfront * Some MLS’s do not share this data. |
| max_baths | Display properties that have <= the number of bathooms specified |
| max_beds | Display properties that have <= the number of bedrooms specified |
| max_price | Display properties that have a current Listing Price <= specified |
| min_baths | Display properties that have >= the number of bathooms specified |
| min_beds | Display properties that have >= the number of bedrooms specified |
| min_images | Only display properties that have at least x property images. [rover_idx_full_page all_cities=”Barnstable,Bourne,Chatham,Dennis,Eastham,Falmouth” min_images=1] |
| min_price | Display properties that have a current Listing Price >= specified |
| min_year_built | Display only properties that are built on or after a specified year. The year should be in 4-digit format. * Some MLS’s do not share this data. |
| new_and_updated | Display new or updated listings. The value specified can be a relative date or a specific date: Relative dates could be: – new_and_updated=”3days” – new_and_updated=”1week” – new_and_updated=”1month” Specific dates could be (always YYYY-MM-DD): – new_and_updated=”2017-04-02″ |
| newconstruction | Display only properties that are flagged as new construction. * Some MLS’s do not share this data. |
| oceanfront | Display only properties that are oceanfront * Some MLS’s do not share this data. |
| open_house_in_next_x_days | Display only properties that have a scheduled open house in the next x days |
| pets_allowed | Display listings that allow pets. |
| polygons | You can define one or more polygons (shapes on a map), and these polygons will define which listings display on a page. The page can display a map, or just listings with no map. See Polygon search for more information. By default, these polygons are drawn on the map. If you want the polygons to … Read more |
| pondfront | Display only properties that are pondfront * Some MLS’s do not share this data. |
| pool | Display listings that have a pool. More pool information (above ground, inground…) usually appear in the External section of the property page. |
| prop_types | Rover maps the MLS property type for a given listing to a specific Rover property type. We do this so that you do not need to know anything about the MLS, which is especially helpful when displaying listings from multiple MLS’s on one site/page. When activated, Rover IDX defaults to these most common property types: … Read more |
| region | The region defines which MLS regions to be used for this shortcode output. When only one MLS region is specified region=”RAPB”: a: The output will initialize with data from that specified region b: If a search panel is part of that output, the search panel will be limited to displaying listings for just that region. Specify … Read more |
| riverfront | Display only properties that are riverfront * Some MLS’s do not share this data. |
| school | Display listings found near a specific school. This search is a partial match search, so if you use school=”washington”, all listings for both ‘washington heights’ and ‘washington elementary’ will be included. NOTE: Not all MLS’s share school information. |
| short_sale | Limit search results to listings that are categorized as Short Sale. |
| show_polygons | When using the Polygons parameter in a shortcode, the polygon will be displayed on the map. If you do not want it displayed (but still obeyed), use `show_polygons=”false”` |
| sqft | Display properties with >= square footage. Listings with no interior square footage (land, for example) will be excluded. |
| state | Limit listings to a specified state |
| status | By default, Rover IDX searches for ‘Active’ and ‘Pending’ listings listings. To tell Rover to search for specific status of listings, use this parameter. The three status are: active pending sold These statuses can be combined in the shortcode: status=”active,pending” |
| street | Display listings for a specific street. This search is a partial match search, so if you use street=”comm”, all listings for ‘commercial’ street will be included. Additionally, you can include street numbers and street suffixes (St, Rd, Road, Ln…). For instance: street=”45plant” will match 45 Plant Rd, 845Plant Ave, and 43845 Plantation Causeway. |
| subdivision | Find listings by subdivision. The value you specify for subdivision is a partial match. So if you specify ‘woods’, listings in both ‘winterwoods’ and ‘the woods’ will be matched. * Some MLS’s do not share subdivision data. |
| tennis | Display only properties that abut or are nearby tennis facilities * Some MLS’s do not share this data. |
| zipcode | Find listings by zip code. This parameter can take a comma-separated list of zip codes. |